ARES Deployment Vests

ARES  Deployment Vest

$20.00 via ARRL + Shipping

ARRL – ARES Deployment Vest Order Page

ARES Deployment Vest

Mesh vest with large front and back reflector panels. Pocket with ARES logo and mike clip on front and imprinted with “AMATEUR RADIO EMERGENCY COMMUNICATIONS” on the back side.

Note: ARES Standardized Apparel

ARES members, while activated, deployed, in community service activities or otherwise on duty shall wear over their normal apparel, at minimum, a florescent green ANSI Class 2 reflective, 100% polyester vest.

The vest shall be decorated in the following manner:

On the Back:
In minimum 2″ lettering, Arial Black font, black in color, imprinted above the horizontal reflective tape:

AMATEUR RADIO
EMERGENCY
COMMUNICATIONS

Those in a leadership position may add their title (SEC, DIRECTOR, EC, PIO, etc) below the words “Emergency Communications” in not less than 3″ tall font, black. (Under the lower reflective stripe).

Local jurisdictions may elect to add their organization name above the words “Amateur Radio” with no larger than 1″ Arial Black lettering, color black.

On the Front:
On the Left Chest, the ARES logo, minimum 3.5-inch diameter, black in color, negative background.
The Right Chest shall remain blank so as to allow wearer to affix their ARES or ARRL name badge.

Vests may have zip or Velcro type front closures. Members may choose vests with or without pockets, at their own discretion. Other apparel, such as short and long sleeve tee shirts, jackets and coats are approved for member use as long as the garments meet the same color, ANSI Class 2, lettering and decoration standard. A waiver of this standard may be given by an SEC for specific purposes with good cause.

We know that many people already have some form of special clothing they purchased. As these are worn out they should be replaced with clothing meeting the new standards.

Google ‘ARES VESTS’ for many options.

Leave a Reply